FNSS KAPLAN-20 armoured fighting vehicle (AFV)

FNSS KAPLAN-20 armoured fighting vehicle (AFV)

FNSS Defence Systems unveiled its new-generation, tracked armoured fighting vehicle (AFV), KAPLAN-20 at the International Defence Industry Fair IDEF 2015 held in Istanbul, Turkey, in May 2015.
The vehicle is intended to meet tactical and technical needs of the Turkish Armed Forces, as well as other friendly nations and allies.
The KAPLAN-20 AFV is offered in armoured personnel carrier (APC) and turreted versions. It can be deployed in special operations, full-spectrum conflicts, reconnaissance, independent infantry operations, and mechanised / armoured infantry operations.
Design and features of KAPLAN-20 armoured fighting vehicle
The KAPLAN-20 new-generation armoured fighting vehicle features a water-resistant hull and amphibious characteristics. It is 6.5m-long, 3.15m-wide, has an overall height of 2m and accommodates a crew of three members, including driver, gunner and commander.
Positioned at the front of the vehicle is the driver, while the gunner and commander seats are placed in the middle section.
The personnel carrier variant can carry up to eight troops in the rear compartment, whereas the turreted version can be configured with six seats for dismounts.
A door on the hydraulic ramp located at the rear section enables entry and exit of troops. A wide hatch is provided on the top for use by personnel, while another hatch is provided at the front of the vehicle for maximising the driver’s field of view.
Mission systems installed in the vehicle include navigation system, 360° situational awareness system, see-through armour system, daylight-adaptive interior lighting system, battlefield management system (BMS), wireless crew intercom system and an identification friend or foe (IFF) system.
The vehicle incorporates a 24V electrical system and an auxiliary power unit.
Armament and protection features
The KAPLAN-20 NG AFV’s remote-controlled turret is mounted with a 30mm automatic cannon, while a 7.62mm machine gun is fitted to a coaxial mount as a secondary armament. It can also be armed with 105mm gun systems.
The armoured vehicle’s protection features include automatic fire extinguishing system, blast and leakage-protected fuel cells, advanced modular armour protection, a laser warning system and an active protection system. Its mine blast-protected seats provide increased protection for the occupants in the event of an explosion.
Protection for the AFV against mines, improvised explosive devices (IEDs), kinetic energy threats and rocket-propelled grenades is provided by the ballistic hull, chemical, biological, radiological and nuclear (CBRN) protection and sniper detection systems. The smoke grenade dischargers offer additional protection for the crew and dismounts.
Observation and fire control of the new-generation AFV
The KAPLAN-20 armoured fighting vehicle is fitted with an independent panoramic commander’s sight and a stabilised gunner’s sight, providing increased surveillance and target detection capabilities. Both the gunner and commander sights feature a thermal channel, day channel, laser range finder (LRF), and fire control system.
Thermal sights and laser-protected glass periscopes are provided to the driver for high-situational awareness. The vehicle is also integrated with a stabilised electric turret drive system.
Engine
“The KAPLAN-20 new-generation armoured fighting vehicle features a water-resistant hull and amphibious characteristics.”
The KAPLAN-20 NG AFV vehicle is powered by a diesel engine coupled to a fully-automatic transmission system. A heavy-duty torsion bar suspension system improves durability and ride comfort of the vehicle.
The vehicle has a power-to-weight ratio of between 22hp/t and 25hp/t, and is equipped with two fully-armoured fuel tanks at the rear. Its running gear consists of six road wheels on each side.
Two rear-mounted water propulsion systems enable the vehicle to perform amphibious operations without any preparation.
KAPLAN-20 AFV’s mobility
The vehicle has a maximum road speed of 70km/h and a range exceeding 650km. It can climb obstacles of 0.7m and cross trenches up to 2.6m. Its gradient and side slopes are 60% and 40%, respectively.
The vehicle can traverse through muddy, soft soil and rough terrains, and is capable of operating under hot or cold weather conditions.
With the KAPLAN-20 Next Generation Armoured Fighting Vehicle (NGAFV), FNSS carries its ACV class vehicles – which are already serving commendably in the inventories of the Turkish, United Arab Emirates and Malaysian Armed Forces – to the 21st century. The vehicle has an average power-to-weight ratio of 23 HP/ton depending on its combat weight, an automatic transmission and the ability to operate jointly with main battle tanks. Moreover, through the integration of different subsystems, the vehicle can execute a wide range of missions.
The hull of the KAPLAN-20 NGAFV, one of the few vehicles of its class with amphibious capabilities, is manufactured from ballistic materials and assembled using a ballistic welding technique. The power pack cabin and the expanded driver area are located at the front of the vehicle, while the gunner and the commander areas are located in the middle. The personnel carrier configuration can carry eight troops at the rear, while the configuration with the armed turret can carry six personnel.
K. Nail Kurt, General Manager and CEO of FNSS, notes that FNSS continues to be assertive in the ACV class vehicles with the KAPLAN-20: “In recent years, the weight of armoured combat vehicles has increased considerably, especially due to the need for higher survivability. The KAPLAN-20 offers an effective solution in the market, in a different and lower weight class. The fact that our vehicle is amphibious also provides considerable flexibility to the armed forces that might potentially use it. With the KAPLAN-20, FNSS aims to continue the success it had with the ACV.”
The BMP prototype was equipped with a remotely controlled version of the FNSS Teber-30 own tower with a 30 mm automatic gun Orbital ATK Armament Systems Mk 44 and a twin 7.62 mm machine gun (in fact, this module looked like a prototype on the prototype).
At IDEF-2017 instead of the prototype developed based on the chassis FNSS was presentedKaplan-20 tracked armored Kaplan LAWC-T (Light Armoured Weapon Carrier – Tracked) , also planned to be used as a self-propelled anti-tank systems and machine intelligence. The presented prototype Kaplan LAWC-T is equipped with a machine-controlled remotely controlled Aselsan SAPR module.
The prototype of the Kaplan LAWC-T tracked armored personnel carrier based on the new Kaplan-20 infantry fighting vehicle developed by the Turkish company FNSS Savunma Sistemleri in the exposition of IDEF-2017. The machine is equipped with a machine -controlled remotely controlled Aselsan SAPR module

Watch video

Comments are closed.